Preguntas frecuentes

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Some near-infrared light is absorbed by hair, skin, and skull, while a portion may continue into deeper tissue layers.

The amount of light that reaches deeper layers can vary depending on hair, scalp, skull structure, light dose, and placement. This is why wavelength, irradiance, placement, and session duration are important in Brainlume’s design.

Monte Carlo light modeling is a simulation method used to estimate how light may scatter, absorb, and distribute through layered biological tissues.

In simple terms, researchers can create a digital head model and simulate large numbers of virtual photons to better understand potential light-distribution patterns. This helps guide design choices such as light placement, power, dose, and overall light-delivery layout.

Brainlume is designed for low-sensation, non-thermal daily use. You may not feel heat, vibration, or an obvious physical sensation during a session.

That does not mean the device is not operating as designed. Photobiomodulation is often discussed at the level of light interaction, cellular response, and routine-based use rather than instant sensory feedback.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Most users can start with one session per day and adjust based on their routine.

Some users may choose up to two sessions per day, such as one Day Mode session during a work break or before focused tasks, and one Night Mode session before bed as part of an evening wind-down routine.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Utilice este texto para responder las preguntas de sus clientes con el mayor detalle posible.

Brainlume is designed to support daily routines around wind-down, recovery, and focus-oriented reset moments.

Some users may notice a calmer evening routine, easier transition into rest, clearer daily recharge, or a better reset after screen-heavy work. Others may notice changes more gradually through repeated use.

For many wellness routines, consistency matters. We recommend using Brainlume regularly for at least 1–2 weeks before judging how it fits your routine.

Brainlume is designed for these everyday use cases.

Night Mode can be used before bed as a calming wind-down ritual. Day Mode can be used before work, studying, reading, planning, or creative tasks. Brainlume can also fit after long periods of screen time, meetings, or mentally demanding work as a quiet 20-minute reset moment.

People have different sleep patterns, stress loads, daily routines, hair thickness, scalp structure, device fit, and sensitivity to light-based wellness routines.

Because of these individual differences, some users notice changes sooner, while others may need more consistent use or may not notice a strong immediate sensation.

Brainlume is designed as a low-sensation, non-thermal, non-invasive wellness device for daily use.

Most users should not expect strong heat during a session. Use Brainlume according to the recommended instructions and avoid overuse. If you experience discomfort, irritation, dizziness, headache, or any unusual reaction, stop using the device and contact support or a qualified professional.

Yes. Brainlume is non-invasive and does not require nasal insertion.

Unlike devices that use a nasal light applicator, Brainlume uses a head-worn light-delivery design with no component placed inside the nose. This makes the experience more comfortable, more natural, and easier to repeat consistently for daily use.

Near-infrared light is mostly outside the visible light range, so it may appear very dim or not clearly visible to the human eye.

Even if the light does not look bright, do not stare directly at the light source for extended periods. Near-infrared light may still irritate the eyes when viewed directly. Many users prefer to relax, read, journal, or sit quietly during a session.

Hair can affect how much near-infrared light reaches the scalp because some light may be reflected, scattered, or absorbed before reaching the skin.

For best use, position the device carefully and make sure the light-delivery modules sit as close and stable as possible according to the instructions.

You may use Brainlume before sleep while sitting or reclining in a stable position. Do not sleep with the device on, and remove it after the session ends.

Do not use Brainlume during exercise or vigorous movement. Do not use it in the shower, bath, sauna, or other wet environments. Keep the device dry.

If you have a photosensitive condition, unhealed head injury, implanted electronic device, neurological condition, or are under medical care, consult a qualified healthcare professional before using Brainlume.

Brainlume is designed for general wellness use and is not a substitute for medical advice, diagnosis, or treatment.

Brainlume’s key light-delivery parameters are:

• Wavelength: 810nm near-infrared light
• Light-delivery modules: 6
• Average optical output: approximately 180mW per module
• Total average optical output: approximately 1.08W
• Spot area per module: approximately 1.3cm²
• Total effective irradiation area: approximately 7.8cm²
• Estimated scalp irradiance: approximately 140mW/cm²
• Radiant exposure: approximately 168J/cm² per 20-minute session
• Total delivered energy: approximately 1296J per 20-minute session
• Modes: 40Hz Day Mode and 10Hz Night Mode

180mW refers to the average optical output per light-delivery module.

Brainlume has 6 modules, so the total average optical output is approximately 1.08W across the full device.

Irradiance describes how much light power reaches a given area at the scalp surface. Brainlume’s estimated scalp irradiance is approximately 140mW/cm².

Radiant exposure describes the total light energy delivered per unit area over time. Brainlume’s radiant exposure is approximately 168J/cm² per 20-minute session.

A standard 20-minute session equals 1200 seconds:

140mW/cm² × 1200 seconds = 168J/cm²

Total delivered energy describes the estimated total light energy delivered across all 6 modules during one session. Brainlume’s total average optical output is approximately 1.08W:

1.08W × 1200 seconds = 1296J

Brainlume’s public dosage parameters, such as irradiance and radiant exposure, describe light delivery at the scalp surface under intended use conditions.

The amount of light that reaches deeper tissue can vary depending on hair, skin, skull structure, placement, and individual differences. Hair can reduce direct light contact with the scalp, so proper positioning helps improve consistency.

Brainlume is designed for simple guided use. Users do not need to manually calculate or adjust wavelength, output power, irradiance, or radiant exposure.

A higher dose does not always mean better results. In photobiomodulation, wavelength, dose, timing, placement, and routine consistency all matter. Brainlume is designed around a standardized 20-minute session to provide consistent daily light delivery.

Yes. Brainlume uses a rechargeable 5000mAh battery.

The device is designed for portable daily use and comes with a controller and charging cable. Actual usage time may vary depending on use patterns, charging behavior, and product conditions.

Brainlume includes the main device, power supply and controller, charging/data cable, instruction manual, and certificate of conformity.

Please check the product package and user manual for the latest included accessories.

Yes. Brainlume is inspired by the broader field of photobiomodulation research, especially near-infrared light interaction with biological tissue, mitochondrial pathways, oxygen-related processes, and brain wellness applications.

Research references are provided for educational purposes and to explain the scientific context behind Brainlume’s design. Unless clearly stated, studies referenced on the Science page may not have been conducted on Brainlume specifically.

Near-infrared light is studied for its interaction with mitochondria-related cellular pathways.

Brainlume uses this scientific context to explain why cellular energy, recovery, and daily routines matter. “Brain energy” is used as an educational concept to describe the connection between recovery, cellular energy pathways, sleep preparation, stress load, and mental reset routines.

Brainlume is positioned as a general wellness product.

It is designed for daily wellness routines around wind-down, recovery, and focus-oriented reset moments. It is not intended to diagnose, treat, cure, or prevent disease, and it should not replace medical advice, diagnosis, or treatment.

If you have ongoing sleep problems, mood concerns, neurological symptoms, or other health issues, consult a qualified healthcare professional.

Shipping availability, shipping cost, and delivery time may vary by launch phase, region, and fulfillment status.

Please check the checkout page for the latest shipping availability, available delivery options, estimated delivery time, and final shipping cost before completing your order.

Yes. When tracking is available, we will send tracking details to the email address used for your order.

If your order has not yet shipped, contact us as soon as possible and we will do our best to help update your shipping information. Once an order has entered fulfillment or shipped, address changes may no longer be possible.

If your Brainlume arrives damaged, please contact our support team with your order number, photos of the package, and photos of the product condition. We will review the issue and help you with the next steps.

Return eligibility may depend on the purchase channel, product condition, timing, and regional policy requirements. Please refer to the official Refund & Return Policy on our website for the most current details.

For product questions, order support, shipping, returns, or troubleshooting, please contact:

support@brainlumepbm.com

Yes. We welcome wholesale, affiliate, PR, and partnership inquiries.

Please contact:

info@brainlumepbm.com

Include your name, organization, website or channel, and a brief description of the opportunity.